1 / 2
Holder for Prusa Mini Steel Sheets, Top or Side-Mountable on LACK Enclosure or Under-Counter — image 1
1 / 2

Holder for Prusa Mini Steel Sheets, Top or Side-Mountable on LACK Enclosure or Under-Counter

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Holder for 3 MINI steel sheets, to mount on the side or the top of an enclosure or under the counter

Rating
4.75 / 5
Likes
74
Downloads
162
Makes
4
Views
2,841
Reviews
4

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution — Noncommercial — Share Alike

There are plenty of holders for Prusa Mini steel sheets around, but most of them are stand-on-your-desk or mount-on-the-wall types. I was looking for something I could mount on the side wall of my LACK enclosure. This is what I came up with. It also offers the option to mount it on top of the enclosure

Update 2023-01-20: Added version with four holes, so it can be mounted under a counter. Thanks to @dimo414 for the suggestion. Also “fixed” a small issue with the countersink dimensions although it never caused a problem for me in practice.

It can hold three steel sheets, smooth or textured. They are a bit staggered, to make taking them out easier.

Hardware: 2x #8-3/4 Philips flat head screws to mount the holder, using pilot holes I drilled with a 3/32 drill bit. #6 screws should work as well.

The idea for placing the screws is borrowed from 3DMichel's https://www.prusaprinters.org/prints/39334

Print instructions

I suggest printing it in PETG to best match the looks of the LACK enclosure, but I don't see why PLA wouldn't work. 0.3mm layer height with a standard 0.4mm nozzle, no supports needed if printed standing up in its natural position.

I printed the holder with a 0.6mm nozzle and 0.35mm layer height.

To mount, mark the positions of the screw holes, drill pilot holes with a 3/32 drill bit or similar into the enclosure, then use two #8-3/4 flat head screws (or #6 screws) to mount. I'm sure you can figure out how many screws you need for the four-hole version 🙂

If you like what I'm doing…

 … consider buying me a coffee or joining my Club.