Toy Farm Tractor
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Created a farm tractor using Fusion 360. This is the 2nd model in my toy vehicle series I am working on.
- Rating
- 5 / 5
- Likes
- 13
- Downloads
- 43
- Makes
- 1
- Views
- 430
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I created this model using fusion360. It was printed on the Ender 3, Ender 3 Pro, and Ender 3 Neo Max. I printed using Polymaker Pro PLA black, and blue. I also used Amolen PLA silver silk. When printing the front axle, rear axle, steering column, steering wheel, exhaust assembly, and front wheel spacers were all printed at 100% infill. I used brim on small parts to keep the secured to bed while printing. I used to support only on the front wheel strut and the chassis. All other parts print orientation was set no support was needed.
The rear axle was created as an 8-side polygon so it can be printed flat on the bed. It will require some sanding to be able to insert into Rear Wheels.
I intentionally designed the rear axle to extend through chassis, spacers and the rear wheels to allow you to freely spin the wheels.
Lesson Learned - Ensure the steering wheel is installed in the engine before gluing the front grill, engine, engine cover, and seat assembly to the chassis.