1 / 2
Q-tip FPV transmitter Stick End
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Stick End for an FPV transmitter
- Rating
- 5 / 5
- Likes
- 31
- Downloads
- 227
- Makes
- 1
- Views
- 939
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
Introducing the q-tip stick end for an FPV transmitter. The hole is self threading on an M3 bolt. I can create other sizes if anyone asks. I liked this particular stick end since I'm a bit of a hybrid user.
Notes:
Don't over tighten, it is plastic and will strip easily, you'll have to re-print which isn't such a big deal. It should hold its position really well since the hole is slightly undersized and grips the bolt. It's possible to add a threaded insert, but haven't designed for it.
When printing I recommend .24 to 0.2 mm height. with 20% infill.