Xtool P2 4 Inch Exhaust Replacement Adaptor
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adaptor plate to make the exhaust on the P2 a 100mm not 75mm
- Rating
- 5 / 5
- Likes
- 36
- Downloads
- 334
- Makes
- 2
- Views
- 1,877
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Standard Digital File License
Parts are printed in PLA which should be fine for this application
Parts included in the set:
3d printed 100mm conversion adaptor
3d Printed Xtool back plate that replaced the one on the back of the machine
3d printed fan dummy. This kit can be run with or without the original fan connected (if the og fan is unplugged you will get a warning in xcs software but you can click "ignore" and the machine will continue to run)
You will need 4 M3 x 50mm socket cap bolts and washers to use with this as the original hardware cannot be used
This product is compatible with the xTool P2 laser engraver it is a after market item and not produced by Xtool themselves