4D Gridfinity Hex Key Holder - Stack metric or SAE allen wrenches vertically or horizontally, all sizes 7mm or smaller
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Store 8 or more wrenches in a single bin, horizontally or vertically, of any size 7mm or smaller!
- Rating
- 4.5 / 5
- Likes
- 19
- Downloads
- 92
- Makes
- 2
- Views
- 1,335
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution
Bring your Gridfinity into the 4th dimension! Place your bins on multiple sides, allowing for tall objects such as markers or hex keys to be stored where vertical height is limited, such as a drawer (the 4th dimension).
This specific model allows for 8 (or more…) wrenches to be stored in a single bin. The slots are 7mm in size and each slot is adjacent to at least 2 magnets to hold them in place. Can likely be used with other tools such as drill bits or anything else magnetic.
Printing directions: In your slicer place the print so that the slot openings are facing upward. Please be aware that the central magnet is intended for 2x 6mm magnets to be stacked for extra holding strength. Also, the 2 upper slots on the “top” of the Gridfinity bin (the “top” with the lip around the edge) are extra deep to allow for 2x magnets as well. These are circled in red in one of the photos.
Other 4D Gridfinity models of mine: