Filament Oiler holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This holds the filament oiler shut if your latch doesn't work, like mine.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 16
- Makes
- 0
- Views
- 199
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Description
This is a model I made to hold my filament oiler shut when the print in place latch didn't really work that well. I really liked the model, so I designed this band to hold it shut. Both models are closed, so you have to insert the filament into it. The vase mode version was designed in Fusion 360 and has a hairline gap in it, meaning you have to lower the slicing gap closing radius setting to zero. (Requires at least advanced level view in PrusaSlicer in order to see it.) The regular one was designed in Tinkercad and requires no special settings. It is also a looser fit. I printed it in PETG, but I see no reason why PLA would not work.
UPDATE 7/5/2023:
I have added a model with a hole in it to put oil into. This model is currently untested as my 3d printer is out of commission. The dimensions are based off of the other ones so it should work. I will update once I can print again.
UPDATE 7/28/2023:
Model with oil hole tested and complete! Model with hole altered to make the holes line up better. The model with the hole is asymmetric because of this, so if the holes don't line up, try switching it around and see if that works.
Print Settings:
Printer:
Aquila X2
Filament:
SUNLU Red PETG
Rafts:
No
Supports:
No
Slicing gap closing radius:
0 for vase mode version
Vase mode:
Only for vase mode version
Infill:
This is a thin model, so it doesn't matter.