1 / 3
Bell syphon for aquaponics
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3D printable bell syphon outer for aquaponics system
- Rating
- 0 / 5
- Likes
- 23
- Downloads
- 122
- Makes
- 0
- Views
- 1,654
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
Bell syphon I made for an aquaponics system.
This is the outer bell, with a hole in the top to insert some aquarium air line tubing to help break the syphon.
I have added 3 STL's. One is the entire thing (not sure how well this will work because it was 2 bit for my printer) and the other 2 are the separate pieces which I printed on my Prusa MK3s.
If you print the pieces separately then make sure you use some form of sealant between the 2 parts. I personally used solvent cement.