Foam core board display bracket

Hi, this is my first upload to Printables. This is a simple wall bracket designed for standard 3/16" thickness foam core boards. It can hold up to four pieces and has been designed to hold them at a slight angle to keep boards leaned into the wall for stability.

It is sized to use large size 3M Command Strips to adhere the bracket to the wall.

At work, I use two brackets to hold large scale maps printed on 36" x 48" foam boards. You can hold larger pieces more securely by using more than two brackets. You can also scale the brackets to handle larger thicknesses. 

I printed this on a Bambu P1P using California Filament's beige PETG using a modified version of the basic PETG 0.20mm “strong” profile with 50% infill using a triangular infill pattern. This is probably overkill, but they are incredibly rigid and strong.

I print these sideways so the walls have some texture which help with adhesion to the command strips. You can also roughen the surface with some sandpaper for better adhesion.