DMX MIDI WING WIP
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
Hi there!
Recently I build a Mist-Stream Deck from Thingverse, and I was thinking about getting this a little bit more into the light-design corner.
I finished the case and atm I am printing it so see if it fits my needs. (It is my first enclousure design, be gentle.)
There are 8 60 mm faders (45 mm travel distance, 60 mm body dimension) and four buttons to each fader. (Select, Play, Pause, Trigger)
This is meant as a experiment due to my original chamsys console; but you could use it as normal DAW for nearly any software.
Feel free to test out the enclousure, I will inform you about my progress!
And check out the original made by MisteR_ofcl on thingverse:
https://www.thingiverse.com/thing:4627779
This is considered as WIP, when the first test-unit is working I will take some thoughts about a nice mounting system; i am thinking about a modified version of something like this:
https://www.thingiverse.com/thing:4625988
to mount the unit in a briefcase on top of my normal lighting console.
Edit:
Too tired to double check, added 10-Fader version to match the chamsys mini-wing layout.
Print instructions
0.2 layer
0.4 nozzle
20-50% cubic infill