1 / 5
Labists ET4 Bed Wire Relief
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modified the original Thing to suit the Labists ET4.
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 120
- Makes
- 2
- Views
- 805
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
Modified the original Thing to suit the Labists ET4. The bed on the Labists ET4 has the wires soldered direct to the heated bed but the cable management is rubbish and likes to wrap around the Y endstop.
How to fit:
Thanks to Penguin President for pointing out the need to remove the glass plate and unscrew the existing wire clamp
This replaces everything at the bed and directs the wire to the side. You just need 2 x M3 bolts and nuts.
Print instructions
Print Settings
Printer: Any
Rafts: No
Supports: No
Resolution: 0.3
Infill: 25%
Filament: Ideally ABS or ASA