1 / 2
CNC clamp hold down for 2 x4 size lumber.
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Uses 2 x M6 bolts at 14mm and 25mm to hold down a 2 x 4 (1.75 inch 40mm) in height.
- Rating
- 5 / 5
- Likes
- 27
- Downloads
- 166
- Makes
- 1
- Views
- 762
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Large hold down clamp which used in qty 4 or 6 can hold down a 2x4 or larger at multiple lengths.
I printed at 0.15 thickness and the part uses roughly 16g of filament. I used a support for both the front and rear overhangs at 30 deg on bambu slicers and 70 or 80 deg on cura for easy breakaway.
Use 2 x M6 bolts with a washer, one 14mm and one 25mm for extra stability - it can work with one 14 at the far end, but not advised due to movement.