Ikea Vidga hanger clip
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I'm building a cargo trailer camper and I'm using the Ikea Vigda sliding track suspended from the ceiling for the…
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 47
- Makes
- 0
- Views
- 622
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution
I'm building a cargo trailer camper and I'm using the Ikea Vigda sliding track suspended from the ceiling for the shower enclosure. Unfortunately when you buy the track it only comes with two hanger clips and I needed a couple of extra for a sturdy installation and you can't purchase these separately. I made two versions one is a clip similar to the ones you get in the kit less the toggle end because I wanted to use this on an end run and didn't want the toggle in the way, the second clip is just solid blocking which I used to join two pieces of track together. I clamped the pieces together with the ceiling mount then drilled a 1/16" hole all the way through the track and hammer a pin into place to lock the tracks permanently together.
Print instructions
Printer:
Mk2.5s
</div>Rafts:No
Supports:
No
</div>Resolution:.20
Infill:
90%
</div>Filament:
Solutech PETG white