1 / 5
Cloth hanger clip
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Flexible cloth hanger easy to print Scale the profile in z for different stiffnesses For best use, prefer PETG
- Rating
- 0 / 5
- Likes
- 64
- Downloads
- 92
- Makes
- 1
- Views
- 1,184
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
A simple-looking design but has a lot that went through!
Design Optimized for :
- Print time
- Stiffness
- Material volume
How to use:
- These are just push-in and pull-out types of clamps
- Place the clamp over the rod and Clothing
- Push the clip and it holds onto the clothing
- To remove it, simply pull out the clip
Configurations:
You can scale the profile in Z
- I am using 4mm and 6mm thick two clips
- for the case where it needs more expansion. I use the 4mm thick one
- for the thinner clothes, I use the 6mm wide clip
Print parameters that worked for me:
- 0.3mm layer height
- No supports
- No infill
- Print time was roughly 18min for two different clips with above mentioned thicknesses