Pegboard Wrenchholder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wrenchholder for 15 degree wrenches.
- Rating
- 0 / 5
- Likes
- 131
- Downloads
- 399
- Makes
- 0
- Views
- 3,209
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
This is a holder for a set of 12 ring wrenches with an angle of 15 degrees.
There was requests for a holder of 2 sets, now also available is a version for 2 wrenches of each size.
I was inspired by the nice model from Johann Arndt.
But as I had a set of 12 wrenches I started a remix adding some further improvements:
- better wrench fixation
- legend in a different color
- using screws for pegboard fixation (easy to print and very robust)
- printing without support
To fit on a Prusa MKS print bed, I designed it in 2 parts (6-12 and 13-19). If you have a Prusa XL, there is also a single holder (6-19) available.
Attention:
The 12.5 mm format is a popular but proprietary format available at various hardware stores. It is not compatible to “Euro norm”, which has a 15 mm grid!
(Adapting to 15mm is possible on request.)
Printing
Filament: Take a filament with good layer adhesion like PETG.
Infill: 30% should be enough
Support: not needed
Color: If you want to have a different color for the legend, set a color change at 9.4mm to text color (e.g. white) and at 9.8mm back to normal color (e.g. black).
Assembly
You need:
- pegboard with 12.5mm grid
- 8x screw 4.2 x (max.) 9.5mm
Put in the screws on the backside and adjust them until you have a tight fit on your pegboard.