Metal handsaw blade storage part 1
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€4.11 – €5.03 net (excluding VAT)
For file: sawblade_storage_300mm_0.6n_0.3mm_PLA_MK3SMMU2S_3h29m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €4.57 excluding VAT (range midpoint).
- Weight reported by the author
- 80 g
- Print time reported by the author
- 3.48 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A simple storage for 300 mm metal handsaw blades for your drawer
- Rating
- 0 / 5
- Likes
- 19
- Downloads
- 35
- Makes
- 0
- Views
- 183
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
I used to have some spare blades for my metal handsaws in my workshop. The normal paper sales packaging dissolves quickly and the saw blades spread uncontrolled around the drawer.
This simple box holds up to 60 blades sorted into 3 compartments for sorting the different tooth pitch, shapes or whatever your needs are.
It is made for standard european metal blades which have a length of 300 mm and a width of aprox. 12 mm. At the front it has a openning for easy take-out with your fingers.
Because one can't print the over 300 mm long model in one part on a Prusa MK3 it is divided into two parts which can easily glued together. I used PLA where acetone and a wee bit of pressure is the easiest way to join them together.
Please also note the second model for saw blades with 150 mm for so-called PUK saws (special German hand saw), which is a nice addition to this model. Booth prints look well without the solid bottom layers and a open honeycomb filling.
As all my models this one is made for and with PrusaSlicer and some special settings may not work with other slicers or printers. Don't blame on me.