1 / 1
Updated Latch for Voron Stealthburner Clockwork 2 (fat_finger)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
After breaking several latches, I remixed the original to make it thicker without causing any fitment issues.
- Rating
- 5 / 5
- Likes
- 61
- Downloads
- 908
- Makes
- 3
- Views
- 2,684
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- GNU General Public License v2.0
No explanation needed if you use the SB CW2. The original stealthburner lever design is thin and there's plenty of room for adding material. We call this the fat_finger mod. If you cannot print one because you only have one printer and the latch broke, contact [email protected]!
Print Settings
- Material: ABS
- Layer height: 0.2mm.
- Extrusion width: 0.4mm, forced.
- Infill pecentage: 40%
- Infill type: grid, gyroid, honeycomb, triangle, or cubic.
- Wall count: 4.
- Solid top/bottom layers: 5.
- Supports: NONE.