Scoreboard mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a mount used to fix a pétanque scoreboard to a wooden post.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 12
- Makes
- 0
- Views
- 162
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
This is a mount used to fix a pétanque scoreboard to a wooden post, used in particular for my own scoreboard design (https://www.printables.com/model/508599). I have published it as it could be useful for other situations where someone may wish to mount a board temporarily on a post or wall.
It uses two pairs of flush bracket mounts for cabinets & pictures, top and bottom of the scoreboard. These were not used directly on the board; the stand-off provided by this mount makes it easier to line everything up on a rough fence post that may not be entirely straight. The matching bracket is screwed directly to the post, but the other way up (obviously!).
I used brackets similar to these, which are fairly common. They have a hole spacing of approximately 34.5mm, but it is possible that the hole spacing of the ones you find will be different - if this is the case, change the variable screwHoleSeparation in the SCAD file and re-compile.
Print Settings
Printer:
G&C CoreXY
Rafts:
Doesn't Matter
Supports:
No
Resolution:
Your choice
Infill:
50%
Filament:
Various Anything durable in the great outdoors.
Notes:
I made mine using PETG, but ABS is also very suitable. PLA may not be durable enough long-term in an open air environment. I used 3 walls and 3 layers top and bottom, with a brim while printing.
Category: Sport & Outdoors