Cordless screwdriver locking & fine adjustment 2.0
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
New solution. This way the gadget should fit more machines. PETG might work. PLA not.
- Rating
- 4 / 5
- Likes
- 72
- Downloads
- 172
- Makes
- 0
- Views
- 1,168
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
New solution. This way the gadget should fit more machines.
PETG might work. PLA not. Best to print with some more flexible materials like TPU or PA.
For a long time I used a device made out of rubber and aluminium to solve this issue (Using a cordless drill in a stand)
This tool should work for a lot of your screwdrivers not only my Festool one. If not please write me and tell the Issue with my design. So i can fix it!
Have fun and keep printin!
For assembling you need 1 M3 Washer 2 M3 & 1 M3 Nylon nuts and 1 M3 screw ( about 20mm). Fix the Knob by screwing one nut and the Screw together very tight. Maybe use some locktite.
Quickstop very easy possible just by snapping the tab!
Print instructions
Unassociated tags: bench drill, drill adjustment, drill stand, screwdriver gadget, screwdriver locking
Category: Machine Tools Summary
New solution. This way the gadget should fit more machines.
PETG might work. PLA not. Best to print with some more flexible materials like TPU or PA.
For a long time I used a device made out of rubber and aluminium to solve this issue (Using a cordless drill in a stand)
This tool should work for a lot of your screwdrivers not only my Festool one. If not please write me and tell the Issue with my design. So i can fix it!
Have fun and keep printin!
For assembling you need 1 M3 Washer 2 M3 & 1 M3 Nylon nuts and 1 M3 screw ( about 20mm). Fix the Knob by screwing one nut and the Screw together very tight. Maybe use some locktite.
Quickstop very easy possible just by snapping the tab!
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
</div>Rafts:No
Supports:
No
</div>Resolution:0.15
Infill:
100
</div>Filament:
Extrudr TPU Red
Notes:
I used Extrudr TPU and/or some PA-CF.
With this print you need a very good layer adhesion!