12cm PC-Fan Soldering Fume-Extractor
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A quick and easy 3D printing model to build a soldering Fume-Extractor out of an 12cm PC Fan.
- Rating
- 5 / 5
- Likes
- 10
- Downloads
- 62
- Makes
- 1
- Views
- 776
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
This is one of my first self constructed models, so I am open for feedback :)
The Fume-Extractor is designed to house a standard 12cm PC-Fan.
You will need to print…
- 1 Fan Housing
- 2 Filter Housing
- 2 Feet (optional)
Additional Hardware:
- Charcoal Filter Mats (ideally 13cm x 13cm but you can just buy a larger Mat and cut it to size)
I used thhese: https://www.amazon.de/dp/B07WR72S4Y?psc=1&ref=ppx_yo2ov_dt_b_product_details
- A 12cm PC Fan
- A 12 Volts Power supply (just check if you have an old one lying around)
Insert The fan and solder it to your power supply. Then glue the model together like shown in the first picture.
If you have any questions feel free to send me a message :)