1 / 2
Nuvinci_Enviolo_380_Drivetrain_tool
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple tool to open/close the Enviolo380 (maybe 330 too) hub.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 17
- Makes
- 1
- Views
- 215
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Public Domain
This is a simple tool to tighten or loosen the lock ring for the brake adapters on a Nuvinvi/Enviolo 380 Drivetrain/Hub. Its an alternative for the commercially available (quite expensive) toolhead, although understandably it cant provide torque accurate tightening due to its handy character.
Besides the printed part (I did 80% 4 perimeters, Polymaker PLA) you need 8xM3 screws, mine are 20mm long. You can use shorter ones.