simple monitor stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
a monitor stand that I can store things under, and which closely matches the dimensions of the books I was using before.
- Rating
- 5 / 5
- Likes
- 26
- Downloads
- 231
- Makes
- 2
- Views
- 954
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
was getting tired of all the desk space taken up by the stack of textbooks I was using as a monitor stand, and decided to model and print a replacement with the exact same dimensions (230 x 170 x 86mm) as an excuse to learn Onshape and mess around with Simscale.
direct Onshape link: https://cad.onshape.com/documents/8dbad03327c66047e60e34a8/w/f3ed4515e746fe0a61c92dc9/e/063badef4b9ae10b4bd687c5
the design is semi-parameterized so you can mess around with its dimensions in CAD if your needs are slightly different.
eats a little less than 200g of filament at the print settings I used (PLA, 0.2mm, 20% rectilinear infill, 3 walls, 3 bottom layers, 4 top layers); suitable only for monitors with a base wider than 6" or so because I reduced the amount of material required by putting a hole in the top where my monitor doesn't bear weight. should be printed with the top toward the build plate.