1 / 3
18650 Battery Case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A queue type case for transporting
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 42
- Makes
- 0
- Views
- 591
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
Original was causing my battery shells to peel off. This one is size to perfection.
I printed in PETG and left it in my car all day with no issues. PLA is fine if you don't plan on leaving your case in a heated area. You will need one of each file. Everything in the print settings section can be changed depending on how you like to adult.
You will need
- x4 M3x20 Screws
- x4 M3 Threaded insert
- 1 of each file
Print Settings:
- Nozzle size 0.6 mm
- Layer and initial Layer height: 0.3 mm
- Line width: 0.72 mm
- Wall line count: 2
- Top/Bottom: 3
- infill: 25% (your discretion)
- Infill Pattern: Gyroid (your discretion)
- Supports: off