Needle File Holder
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€2.48 – €3.03 net (excluding VAT)
For file: fileholder-block_02mm_pla_mk3s_3h7m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.75 excluding VAT (range midpoint).
- Weight reported by the author
- 27 g
- Print time reported by the author
- 3.11 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is a holder for the small needle files sold in sets of twelve like the type shown in the photos.
- Rating
- 5 / 5
- Likes
- 14
- Downloads
- 125
- Makes
- 2
- Views
- 957
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Public Domain
This is a holder for the small needle files sold in sets of twelve like the type shown in the photos. These used to be sold by Harbor Freight; the files HF now sells are similar no longer have the plastic handles (but these same files are still available in the other usual places). Other needle file holder prints are out there, but I wanted to make my own with these features :
- files are held handle down so the file type can be easily seen
- files are held "splayed out" so they are more visible and easier to grab
- as compact as possible with the above features
- bottom of all holes are open to allow easy cleaning
Note that the holder has 13 holes - I added an extra "spare" hole just to fill out the pattern.
The OnShape 3D CAD files are here :
Print instructions
Print in PLA using the 3mf file provided; otherwise :
- 0% infill
- perimeters =2