1 / 8
Jacobs Ladder Toy (Print-in-Place Model) — image 1
1 / 8

Jacobs Ladder Toy (Print-in-Place Model)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

NEW ASSEMBLED VERSION AVAILABLE https://makerworld.com/en/models/2624847-infinite-jacobs-ladder-toy#profileId-2897666

Rating
4.435 / 5
Likes
585
Downloads
5,399
Makes
32
Views
14,650
Reviews
23

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

Commercial license for all my models -→ https://www.patreon.com/MeasureOnce

New assemblable version available on Makerworld https://makerworld.com/en/models/2624847-infinite-jacobs-ladder-toy#profileId-2897666

DO NOT SCALE. There is 0.4mm clearance around the joints. If you scale it any smaller then the joints can fuse together. If you print it larger then the joints will be loose and it will fall apart. 

A print-in-place model for the centuries old toy “Jacobs Ladder.” Does not require any supports and will work right off of the printer! Please make sure your settings are calibrated to handle elephants foot (use a negative initial layer offset) as well as bridging. Do not use a brim. The joints have a gap of 0.015" so make sure your printer can handle that. If it does not work well then you might need to compensate for any over extrusion.  

*****Part will need to be reoriented on built plate with the flat side touching the build plate***

Tags