1 / 12
FYSETC MW Power Supply LRS-350-24 Mount for Prusa MK3S+ & MK4 — image 1
1 / 12

FYSETC MW Power Supply LRS-350-24 Mount for Prusa MK3S+ & MK4

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

FYSETC MW Power Supply LRS-350-24 Mount for Prusa MK3S+ & MK4

Rating
5 / 5
Likes
35
Downloads
165
Makes
5
Views
1,216
Reviews
5

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

         I bought a FYSETC MW Power Supply LRS-350-24 for my MK3 clone, but they sent me the Bear Prusa version, and the adapter they designed was very fragile.

         So, I redesigned it, making it more robust and stronger. I have also made all the STEP and F3D files available, so you can modify them as needed.

 

Why this modification?

         Besides improving the structure, I also wanted to eliminate the insanely loud noise of this power supply. Honestly, I do not recommend this PSU unless you plan to replace the fan.

         In the end, make sure to calculate the total cost—PSU + new fan—because it might get close to the price of the original Prusa power supply. However, since I already had both the PSU and the fan, this upgrade was totally worth it for me.

 

Compatibility with Prusa MK4

         I've been using this on my Prusa MK4 for two years without any issues, so if you're looking for a power supply mount upgrade, this model is fully compatible with both MK3S+ and MK4. ⚠ Important: If you are going to use this with the MK4, you must purchase the Silver PSU Upgrade, as the printer will not work without it.

 

Components I used:

  • Power Supply: FYSETC MW Power Supply LRS-350-24 (High-quality switching power supply for Prusa MK3S+ & MK4)
  • Fan: Noctua NF-A9x14 PWM (92mm slim fan)
  • Silver PSU Upgrade (only required for MK4 users; not necessary for MK3S+ users) - https://www.prusa3d.com/product/silver-psu-upgrade/

 

3D Print Models:

PSU mount - my model:
🔗 FYSETC MW Power Supply LRS-350-24 Mount for Prusa MK3S+ & MK4
https://www.printables.com/model/510521-fysetc-mw-power-supply-lrs-350-24-mount-for-prusa

 

Cover for Noctua 92mm fan  - by another designer:
🔗 Mean Well LRS-350 PSU Lids for 92mm Noctua Slim Fan
https://www.printables.com/model/68410-mean-well-lrs-350-psu-lids-for-92mm-noctua-slim-fa/files

________________________________________________________________________________________________________________

 

                                     ⚙ Fan Connection Adjustment ⚙

 

       If you're replacing the cooler, you'll need to use the plug from the LRS-350 power supply fan, as its connector differs from most aftermarket fans. This means that even if you're upgrading to a new fan, you'll still need to replace the adapter to ensure compatibility with the PSU. 

 

🔗 How to Adapt the Fan Connection (Video Tutorial)
https://www.youtube.com/watch?v=q1mzuaFN4sI

        I found it much easier to cut the wires and splice them together. Since I use Noctua, I took advantage of their OmniJoin Adapter, which makes the process super simple.

For a clear example of how to use the OmniJoin Adapter, you can check out this video:
👉 https://www.youtube.com/watch?v=YhFbd5NMGz4
The process is explained starting at minute 2:00. 🎥

 

Alternative wiring methods:

  • Manually splice the wires and secure them with electrical tape
  • Solder the connection
  • Solder Seal Wire Connectors

         In the end, I decided to use Solder Seal Wire Connectors, which made the job much easier. These connectors provide a strong and secure connection, while also sealing the wires to prevent oxidation. If you want a quick and reliable solution.

For a clear example of how to use Solder Seal Wire Connectors, you can check out this video:
👉 https://www.youtube.com/watch?v=v9kDUKU8PIE
The process is explained in detail there. 🎥

 

There are multiple ways to do this, so feel free to choose what works best for you! 🚀

 

_______________________________________________________________________________________________________

 

✨ Now, this is the pic of my power supply, fully adapted, with all the modifications done and in the color I like, perfectly matching my printer! 🖤🖨⚡

 

 

_______________________________________________________________________________________________________

                                                            ⚠ Very Important ⚠

 

         If you are using this power supply for the MK4 printer, it is crucial that you purchase the Silver PSU - upgrade; otherwise, the printer will not work!!!

         Additionally, there is a detailed installation process outlined in the Prusa manual. Below are both links: one for the upgrade and one for the manual.

Silver PSU - Upgrade 🔌
👉 https://www.prusa3d.com/product/silver-psu-upgrade/

Manual 📚
👉 https://help.prusa3d.com/guide/6-xlcd-assembly_598820#600077

 

________________________________________________________________________________________________________

 

Tags