1 / 1
SV06 Plus Probe Mount for Volcano Nozzle
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A modified version of the open source Z-probe mounting piece that Sovol provides with the SV06 Plus.
- Rating
- 5 / 5
- Likes
- 14
- Downloads
- 120
- Makes
- 0
- Views
- 593
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
This is a modified version of the Z-probe mount that has 3mm taken off the mechanical stop on the inside channel. Here is the fan duct I use with this modification.
This was created since the off-the-shelf volcano nozzle, and z-probe, end up being the same level when the nozzle is screwed all the way into the heat block. By removing the 3mm from the original model, I was able to retain the needed z-offset to print reliably with these.
