1 / 10
Fan lower body for X96 Max
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
If you found my things useful, you can buy me a cup of coffee: http://paypal.me/marcuss24
This is lower case with fan mount for Vontar X96 Max. Now it's possible to cool the cpu properly. I also added Arduino Pro Mini and IR receiver module to cut the tv box from the power when it's turned off, so now it doesn't boot when the power supply is connected. It boots just when the power button on remote controller is clicked. Just replace the original lower body with this one.
There are two variants of lower body:
- x96_max_body.stl -> without hole for IR receiver module
- x96_max_body_ir.stl -> with hole for 5mm IR receiver module
Part list:
- 70mm 12V fan (connected on 5V)
- 4x M4 screws for fan
- 4x M4x12 screws for feet
- 4x rubber foot sticker from original lower body (it fits on printed one)
- cpu heatsink (can be the same as for raspberry pi)
- Arduino pro mini (optional)
- 5mm IR receiver module (optional)
Print Settings
Printer Brand:
TEVO
Printer:
Tarantula
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
20
Category: Electronics