Foot for PS4 FAT

If you found my things useful, you can buy me a cup of coffee: http://paypal.me/marcuss24

Horizontal foot for PS4 SLIM: click here

Horizontal foot for PS4 PRO: click here

!! If you want tight hold, you can scale it down. Scale percentage depends on your filament and printer calibration. !!

I have used 99 % scale.

Update - 30.06.2019

Added files with 10mm height (from ground to PS4)

There are six versions of foot. You can choose which one to print:

• PS4_fat_foot.stl ->20mm wide
• PS4_fat_narrow_foot.stl ->10mm wide
• PS4_fat_foot_logo.stl ->20mm wide with PS logo
• PS4_fat_foot_10mm.stl ->20mm wide, 10mm height (from ground to PS4)
• PS4_fat_foot_narrow_10mm.stl ->10mm wide, 10mm height (from ground to PS4)
• PS4_fat_foot_logo_10mm.stl ->20mm wide with PS logo, 10mm height (from ground to PS4)

I cut holes in the area of cooling fan on my PS4 (fat - original) for better cooling during the summer.

But i wanted to have my PS4 placed horizontally, So I made these foots for better air intake.

I've used PLA.

Started from the scratch, but this design was inspired by darevix Simple foot for PS4 pro (https://www.thingiverse.com/thing:2247283)

Print Settings

Printer Brand:

TEVO

Printer: 

Tarantula

Rafts:

Doesn't Matter

Supports: 

No

Resolution:

0.2 mm

Infill: 

25 %

Filament: Plasty Mladec PLA

Category: Video Games