Mandalorian figure STAR WARS + Grogu
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Very well-known character Mando - protector of Mandalor 😉
- Rating
- 4.944 / 5
- Likes
- 327
- Downloads
- 2,576
- Makes
- 16
- Views
- 6,976
- Reviews
- 18
Updated at source:
Model information
- Source
- Printables
- Category
- Action Figures & Statues
- License
- Creative Commons — Attribution — Noncommercial
I decided to try it without support and it worked. I chose the brim around the legs for a better feel. I haven't tried it without it. In order to print successfully, it is important to have a well-aligned bed, a lower hotend temperature set depending on the filament, a lower speed and appropriately set retraction and z-hop
Print Settings Mando/Grogu
Printer:
Any
Rafts:
Yes 2mm/No
Supports:
No/Yes
Filament brand:
Any (my Aurapol)
Filament color:
Grey
Filament material:
PLA
Notes:
0.24/0.2 mm first layer
0.2/ 0.12mm layer
0.4mm nozzle
2 perimeter
150/45 mm height
0 infill
1mm retraction
0.4 Z-hop
50/40 perimeters speed
215C temp for first layer
198C temperature hotend