FilaOptic Sight
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A friction fit front and rear Picatinny sight that uses 1.75mm filament as the 'Fiber Optic Light Tube'
- Rating
- 5 / 5
- Likes
- 26
- Downloads
- 191
- Makes
- 1
- Views
- 934
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Behold the FilaOptic Sights! Perfect for your foam blaster / Gel blaster / Airsoft
Designed after a Fiber Optic Ghost Ring sight but uses 1.75mm Filament of your choice in place of a true ‘light tube’. You will need 7mm exactly for your Light tube/marker. Use translucent or glow in the dark filament for best performance. Simply print the sights as oriented in the 3MF, with supports on, and 20% infill. Next use a fine drill bit or file to clean up and widen the light tube holes slightly. Then slip your filament section through the brackets on the forward sight and you are done! This model is friction fit, you may need to scale depending on your printer calibration and slicer settings. It fits snuggly on the Foam Blaster pictured (Lynx by Orion Blasters)
Enjoy! Feedback is welcomed!