1 / 2
Hueforge Head Sclupture Print
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution
I created the image in MidJourney, then processed it in HueForge. Sliced in Bambu Studio, but you can use the STL if you want to process it yourself.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
Inland PLA Black Transmission Distance: 0.3
Inland PLA Gray Transmission Distance: 3
Inland PLA White Transmission Distance: 6
Swap Instructions:
Black until layer #5 at 0.48mms
Gray until layer #17 at 1.44mms
White until layer #39 at 3.2mms