1 / 3
Goldwing Faceplate for Garmin Zumo XT / Touratech mount, flush or raised print — image 1
1 / 3

Goldwing Faceplate for Garmin Zumo XT / Touratech mount, flush or raised print

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Goldwing logo faceplate for sneezle1980's Zumo / Touratech dummy GPS unit.

Rating
0 / 5
Likes
5
Downloads
39
Makes
0
Views
865
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution — Noncommercial

Sneezle1980's dummy Zumo is a great solution for when you don't need to bring a GPS, but don't want to stare at an empty Touratech mount nor leave the electrical contacts exposed to the weather. These files are for a Goldwing logo faceplate that can be printed in the sorta standard way (raised letters) or printed flush.

The file "GPS Raised Print Face Plate 01.STL" is for standard printing - if you're not flush printing it's all you need.

The files “GoldWing Logo 01.STL” and “GPS Face Plate 01.STL” are for flush printing. The TL;DR on this is you print the logo face down (as oriented in the STL), and without removing it from the build plate print the face plate (also face down) right over it. If you haven't done this before there are a couple of gotchas. The specifics below are for Cura, but the concepts apply for any slicer.

Load both files into the slicer. Both files have their origins set at the same relative position, but Cura doesn't automatically align them. Select one of the files in the object list then look at it's coordinates - the X Y Z values listed under “move” on the left (see included Cura image). Set X and Y to zero, and do the same for the other file. This should align the 2 prints. Then delete the Face plate file from the object list, and slice the logo. Then reload / re-align the face plate to the logo, and delete the logo from the object list. Don't slice yet - you want to enable Cura's “Z hop when retracted” and set the “Z hop height” to 0.45 (2 1/4 layers at 0.20). This means when the print head moves between print areas, it'll be lifted higher than the print already sitting on the bed. Now slice the faceplate. Print the logo, then without letting the bed cool swap filament and print the faceplate right over it. CHEP has a good video on this procedure if you want more detail: 


I suggest printing in PETG since it's much more resistant to weather and UV light than PLA/PLA+.

Tags