1 / 2
HueForge Owl
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Filament painted using HueForge software, image generated from Midjourney and printed with PLA! No MMU required.
- Rating
- 5 / 5
- Likes
- 281
- Downloads
- 1,189
- Makes
- 11
- Views
- 8,046
- Reviews
- 9
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Owl generated on Midjourney and STL generated with HueForge. No MMU or AMS required. Small enough to print on the Prusa Mini, but I included the HueForge project if you'd like to mix things up a bit.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Swap Instructions:
Black until layer #5 at 0.48mm
Dark Gray until layer #10 at 0.88mm
Light Gray until layer #19 at 1.6mm
White for the rest.