Footrest for IKEA BLAMES highchair
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Footrests for IKEA's child highchair BLAMES. Two models available.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 23
- Makes
- 0
- Views
- 411
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
Update:
I redesigned footrest support, now base can be smoothly adjusted in the range of 5 cm.
POM:
screws: 2pcs M4 hex head 35mm, 2pcs m4 flanged button (or round head) 30mm
nuts: 2 pcs m4 hex nut, 2pcs m4 nylock nut
Support elements have to be printed in two instances - one mirrored, 3 walls, 15% infill. Lay flat with supports
Old version:
Simple footrest for IKEA's child highchair BLAMES. Footrest can be set in 3 different hights. Easy fitting - can be fixed with doubleside adhesive tape or screw.
Printed from PETG, but you can use PLA as well.
You have to print footrest support in two instances - one have to be mirrored.
Print it with highest layer, footrest support print flat, 3 walls, 3top/bottom layers, 15% infill, triangles,
Footrest can be scaled if to long - original model has 25cm, fits well in print height of many 3d printers (compatible with both support versions). Print footrest with 2walls, 3 top/bottom layers, 15% infill