V Slot additions and Junction plates
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
V-Slots and Junction Plates I took the 20x40 V Slot file posted by FLAVIENK and expanded upon it by making a 20x20,…
- Rating
- 5 / 5
- Likes
- 52
- Downloads
- 355
- Makes
- 6
- Views
- 1,618
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
V-Slots and Junction Plates
I took the 20x40 V Slot file posted by FLAVIENK and expanded upon it by making a 20x20, 20x40 (modified), and 20x60 V Slot. I also added some reinforcement internal beams to eliminate the give of the sides. I then developed the plates needed to attach different V Slots together using M5x10mm screws and small M5 "T" nuts. The picture shows all of the developed items. I used PRUSA PETG as the filament of choice when I sliced them. All V Slot files are 10mm in height which can be extruded to desired height (length). I am working on a junction that will allow for the joining of V-Slots that need to be longer than a print bed allows. (ie joining a 200mm and a 100mm V Slot to make a useable 300mm V Slot. The modified and expanded models are mine as are the joiner plates.
Print instructions
I printed in PRUSA PETG for strength. Used a .4 nozzle, .15mm layer , and a 50% fill. When printing the V Slots I used a brim.