1 / 7
Car Phone Holder (with Compliant Springs)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
car phone holder using compliant springs
- Rating
- 5 / 5
- Likes
- 29
- Downloads
- 257
- Makes
- 2
- Views
- 3,293
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
Parts Required 3x M3 25mm or 30mm screws
Car Phone holder designed for use on holidays. Easy to attach to rental cars' air vent; and it takes up little space in the luggage.
Squeeze the holder horizontally, opens the vent clamp. Squeeze the holder vertically, opens the phone clamp.
Update from original model
- extra springs to make it easier to open phone clamp when holder is already attached to the air vent
- vent pins attach from front instead of back. In the original model, if the vent pins were not properly secured, they may fall off the back and into the air vent.
- gap in the bottom support to allow for insertion of USB cable
- rubber band to help provide a tight grip on the phone
- places were added to secure vent pins, when packed
Printing Note
Currently require printing with support on build plate.
Assembly Note
You can wrap some electrical tape over the screw thread, to provide a softer grip on the air vent
Rubber band on phone clamp to provide a strong grip.