Stormtrooper (Filament Painting)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Filament painted print made using HueForge - Filament swaps ONLY, no mmu/ams required
- Rating
- 5 / 5
- Likes
- 99
- Downloads
- 254
- Makes
- 5
- Views
- 2,637
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial
4 Color HueForge model. Stormtrooper filament painting made using Sunlu PLA+ colours.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Sunlu PLA+ Black Transmission Distance: 0.6
PLA Sunlu PLA+ Grey Transmission Distance: 2
PLA Sunlu PLA+ Silver Transmission Distance: 2
PLA Sunlu PLA+ White Transmission Distance: 8
Swap Instructions:
Black until layer #6 at 0.56mm
Grey until layer #8 at 0.72mm
Silver until layer #9 at 0.8mm
White for the rest.
This is a filament blending model, avoid special filaments and stick with the plain ones for the best results. SUNLU filaments tend to be more transmissive and are a good choice.
Use the exact numbers in your slicer to match up properly.
3 different size models are supplied and designed to print with 0.4 nozzle, do not resize the images in the slicer