Headphone Holder Stand Desk Generativ Design
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€16.67 – €20.38 net (excluding VAT)
For file: Headphonesholder_0.2mm_PLA_MK3S.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €18.52 excluding VAT (range midpoint).
- Weight reported by the author
- 186 g
- Print time reported by the author
- 20.72 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Bring a futuristic design to your desk.
- Rating
- 0 / 5
- Likes
- 18
- Downloads
- 72
- Makes
- 0
- Views
- 1,478
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is a simple pressure that requires supports (optimally with organic supports). In addition to the STL, I also include the 3MF and gcode files that I used to print the files shown in the images on my Prusa MK3s+.
The table top may be between 6-34mm thick.
Additional material:
1x M3 screw 20mm
1x M3 nut
The design is ideal for printing with ABS and smoothing with acetone.
Printing with PLA is also possible.
Note to be able to print it on the Prusa Mini:
Since the holder is too large, you can also cut the part and then glue it together. Here I recommend a print with ABS and to glue it make a drop of acetone on the cut edge and press the parts together. After 24 hours, the parts are fused. Then the entire part can be smoothed.
>> Do NOT scale the part smaller or bigger, otherwise the screw connection will not work. <<