Zassenhaus coffee grinder Sliding Cap
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A handy cap to avoid beans jumping out while grinding.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 25
- Makes
- 0
- Views
- 283
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A handy cap to avoid beans jumping out while grinding.
Check your grinder first: this is for a cup with an outer diameter of 92mm.
Print instructions
Print the two parts as given (no supports required). PETG with 0.4 nozzle, 0.2 layer height, 4 perimeters and 100% infill recommended.
The larger part needs to be inserted first and snaps onto the border of the bean cup.
The lid cover needs to be inserted second and attaches (tightly) to the central screw. Be gentle during insertion to avoid damaging the two side arms.
After assembly the lid should rotate freely, with just a little bit of friction.