Zarážka na postel v nemocnici
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€5.77 – €7.05 net (excluding VAT)
For file: Zarazka-postel_0.2mm_PETG_MINI_6h25m - v3.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €6.41 excluding VAT (range midpoint).
- Weight reported by the author
- 86 g
- Print time reported by the author
- 6.41 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Slouží jako zarážka mezi bočnice na postele v nemocnici.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 10
- Makes
- 0
- Views
- 132
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Medical Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Slouží jako zarážka mezi bočnice na postele v nemocnici. Používá se u neklidných pacientů, kteří si mohou bočnice sami spustit a hrozí jim tak pád z postele. Zarážka je konstruovaná tak, aby nebylo jednoduché ji z postele otevřít.
Pro funkčnost je potřeba po vytištění díly slepit lepidlem a vložit pružinku s kuličkového pera pro výsuvný zajišťovací čep.