Rockler box jig dust collection funnel
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€2.01 – €2.46 net (excluding VAT)
For file: box jig funnel support_0.2mm_PLA_MK3S_2h20m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.24 excluding VAT (range midpoint).
- Weight reported by the author
- 26 g
- Print time reported by the author
- 2.33 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Keep things neat with dust collection on your router box jig
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 56
- Makes
- 0
- Views
- 487
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Without dust collection, a router table is one very messy thing. When using Rockler's box joint jig, wood chips will go everywhere without something to suck them up.
I decided this would be a good chance to try modeling a funnel shaped air intake: I just free-handed it (vs doing any math to optimize), but the idea is the funnel shape will cause air getting sucked into accelerate - my hope being that this would draw more chips towards the funnel. In real life, the idea seems to work out!
I'm printing this as two pieces, and then super-gluing the support into place so the edge of the funnel sits flat on the base of the jig. With assembly pins in PrusaSlicer 2.6, I'll see if I can update the model to use those when I have some time…