Sheet Holder for Original Prusa enclosure tool organizer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Plate holder to work with the Original Prusa enclosure tool organizer designed by crn @crn664663
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 36
- Makes
- 0
- Views
- 484
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
I designed this sheet holder to work with the OriginalPrusa enclosure tool organizer designed by crn @crn664663 found at:
https://www.printables.com/model/443341-orginal-prusa-enclosure-tool-organizer
It will hold 3 sheets in a vertically staggered pattern for easy retrieval.
I have printed it in both PLA and PETG with various settings, including the stock PrusaSlicer settings. You can up the perimeters and infill if you want it to be stronger. The parts will need to be rotated to fit on the sheet. The left and right sides will both fit together, if you put the flat side down, they don't need supports. The center piece will need support under the top bit.
You will need 6~m3n and 6~m3x6 to assemble. You should be able to use some of the leftovers from the enclosure. It will slide on the rail mentioned above. It will have conflict with the nylon rivets in certain positions, but there are plenty of options for placement and it will fit snug with the enclosure, supporting itself on the base.
I hope it works out well and please let me know if you have any questions or comments.
Big thanks again to @crn664663 for the design that inspired this!