Estes 2162 - Big Daddy Nosecone
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a work in progress of the nosecone for Estes model 2162 Big Daddy model rocket.
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 112
- Makes
- 1
- Views
- 491
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Creative Commons — Attribution — Noncommercial
If you would like to show some gratitude for this model and encourage me to create more, you can leave a tip for me via PayPal at https://www.paypal.com/paypalme/Arogen67. Thanks.
This is a quick rendering of a Big Daddy nosecone. Not print tested and not compared to a real one, just designed based on the specs found online. If any changes are needed, please let me know
The shoulder should screw into the cone and could also be glued. There is a hole in the bottom with threads for an M8 bolt so you can bolt weights on if you want to.
UPDATE: I rounded off the tip of the nosecone so it isn't so sharp. Some have expressed concerns over the shock cord loop. I haven't had any issues with that design in other nosecones I've made, but if you want you can use the threaded center hole to install an eyebolt and attach to that.