Sandpaper Adapter for Oscillating Multitool
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an adapter for holding sandpaper with an oscillating multitool. I designed it for a DeWalt DCS356, but it may…
- Rating
- 0 / 5
- Likes
- 25
- Downloads
- 148
- Makes
- 0
- Views
- 939
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an adapter for holding sandpaper with an oscillating multitool. I designed it for a DeWalt DCS356, but it may fit other brands/models with the same blade interface.
The Everclamp grid with sqwasher plate and thumbscrews lets you attach sandpaper, a sponge, or other irregularly-shaped objects in any orientation.
Do not print the "uncalibrated" STL files, as the threads will not fit. Instead, use OpenSCAD to convert the attached*.bundle.scad files into STL, calibrated for your printing setup. See https://pmarks-net.github.io/everclamp/#calibration for instructions.
PrusaSlicer settings:
Layer height 0.2mm
Gyroid 15% infill
The elevated flat part requires good support to print correctly:
Support style: organic
Don't support bridges: unchecked (in other words, DO support bridges)
Overhang threshold: 10 degrees (support the bridge, not the screw threads)
Top/Bottom contact Z distance: 0.2 (detachable)
Top/Bottom interface layers: 3 (heavy)
Support speed: 20 mm/s (slow)
Category: Tools