Water level sensor
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.37 – €0.46 net (excluding VAT)
For file: Doorvoer_01-DOOR_0.15mm_PETG_MINI_32m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.42 excluding VAT (range midpoint).
- Weight reported by the author
- 3 g
- Print time reported by the author
- 31.8 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Water is a scarce commodity, so check your levels!
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 31
- Makes
- 0
- Views
- 709
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Public Domain
This float is for a tube with an inner diameter of 8 mm. I use it to check whether my water stack is full or not. It is a watertight box with an inlet, an outlet and a reed float contact. There are gaskets for inlet and reed contact. The bottom with the outlet is glued with white wood glue.
To improve waterproof quality the layer height is set to 0,15 mm and the seams are random. Printed in PETG.
This reed contact is used:
