LayersFactory
Report model
1 / 3
Enraged Rabbit Carrot Patch (ERCP) MultiMOD 6&9x Buffer — image 1
1 / 3

Enraged Rabbit Carrot Patch (ERCP) MultiMOD 6&9x Buffer

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Hills8

Hills8

@Hills8_923525

Filament holder removed and merged to a 6x multi buffer (files for 9 filaments also available)

Rating
5 / 5
Likes
104
Downloads
363
Makes
6
Views
3,977
Reviews
5

Updated at source:

Model information

Source
Printables
Category
Other Printer Parts & Upgrades
License
Creative Commons — Attribution — Share Alike
DetailsFiles (28)Makes & comments (Makes: 6) (Comments: 13)Remixes (0)Collections (138)Related

Carrot_Patch_MultiMOD Assembly

BOM

  • Besides the printed parts you need of course the:
  • 6x 608 bearings
  • 1x 5mm steel rod with a length of 135mm (+ M5 tap) or directly as threaded rod.
  • 2x M5 nuts
  • 6x Pneumatic connector with M6, M8 thread or Ecas (choose correct PatchWall files)
    • (I used M6 connectors and enlarged the filament hole with a 2.5mm drill to reduce friction)
    • Important: If you choose to use M6 version, make sure to use PC4-M6-T version, where the PTFE Tube is able to run through!
  • 4x M3 Threaded inserts
  • 5x Screws M3x20mm + Hex Nuts
  • 4x Screws M3x8mm

Additional Information

  • The assembled PatchWall must have a combined theoretical width of 122mm. Due to tolerances, this can deviate and the LockerClips must be selected/changed accordingly. In the folder "optional" are already prepared lengths up to 126mm

Updates

  • 30.06.2023 :: Update files are marked with V2
  • 17.07.2023 :: Patchwalls for M10 Pneumatic connector and PutInPlace connector added as step (Thanks @Wolffy01_227703 for the Hint)
  • 07.08.2023 :: added base_parts and Lock_clip for 9 filaments as well (parts extended by 58.5mm) see subfolder (step_files_9filaments)
    • be aware you will need a 58.5 mm longer rod as well. :)
  • 27.11.2023 :: !!! Based on some questions received: When using a ERCF you should always use PTFE Tubes with a hole (inner) diameter of 2,5mm, NOT the 2mm standard Tubes used with bowden extruders !!! Otherwise disruptions and unreliability are predetermined.
  • 24.06.2024 :: 6x_Wheel_V2.step added. This Wheel has holes to insert filament for better loading.

Tags

bufferfilamentbufferercfercpenragedrabbit