eSUN eBox Plug
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Plug for the eSUN eBox/eBox Lite
- Rating
- 4.333 / 5
- Likes
- 14
- Downloads
- 123
- Makes
- 4
- Views
- 643
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a plug for the filament hole on the eSUN eBox/eBox Lite when used “only” as a dehydrator, e.g. when to dry filament for storage or to dry desiccant.
This is based on Duane's “eSun eBox Fittings” model.
Update 20230731: New, version with better fit (v11). This version has a slight curve of the top part and a narrower opening at the bottom. This makes the plug to stay attached to the base of the box when the lid is opened. No need for supports
Update 20230927: New images (with dried filament 😊)
Print Settings
Printer: Prusa i3 MK3S+
Rafts: No
Supports: No, but I used the opportunity to try organics supports out! 😊
Resolution: 0.2
Infill: 30%
Infill type: Honeycomb
Filament: PETG
Printed in: Prusament Jet Black PETG
Notes:
Perimeters 5; Bottom and Top solid layers: 4. The perimeters and the infill are to prevent the plug from breaking when removing the supports. If you don't use supports, then your default number of perimeters should be perfectly fine.