1 / 2
Raspberry Pi Camera 2 (rev1.3) Cover for Articulating Raspberry Pi Camera Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The raspicamcover_nolense model from Articulating Raspberry Pi Camera Mount…
- Rating
- 4.947 / 5
- Likes
- 94
- Downloads
- 860
- Makes
- 16
- Views
- 7,179
- Reviews
- 19
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
The raspicamcover_nolense model from Articulating Raspberry Pi Camera Mount (https://www.prusaprinters.org/prints/3407) did not fit my Raspberry Pi Camera 2 (rev 1.3). The lens hole was about 0.045" (1.14mm) lower and would not align with the stock lens.
Thank you Sneaks for providing the step file for the camera cover as this saved a lot of time on my part to adjust the model. I adjusted the lens hole feature up by 0.045" (1.14mm) and re-printed with success.
Print instructions
Print this how you would the original.