130x150 mm solar panel stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a screwable stand for 130×150 mm solar panels.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 50
- Makes
- 0
- Views
- 454
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
This model is a stand designed for 130×150 mm solar panels, which you can commonly find online. You can use two pieces per solar panel and screw them onto any surface.
I recommend using a heat-resistant filament for this design, as the solar panel can become very hot.
Included are the STL file and the FreeCAD project file, allowing you to edit the angle. The optimal inclination depends on your location. For more information about installation recommendations and these solar panels in general, visit my blog: https://louis.leculier.com/publications/projets/rendre-les-projets-delectronique-autonomes-dans-le-jardin/. The STL files have been generated with a 39° angle.