The Last Ronin Comic cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is my First project with HueForge. i will leave the printing instructions below. thanks!!!
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 31
- Makes
- 0
- Views
- 355
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ Sunlu Red Transmission Distance: 6
PLA+ Sunlu Orange Transmission Distance: 5
PLA+ Sunlu White Transmission Distance: 5
Swap Instructions:
Black until layer #14 at 1.2mm
Red until layer #21 at 1.76mm
Orange until layer #24 at 2mm
White for the rest.
(i used Inland pla+ filaments for this print. so dont worry to much about using the exact brand just the same colors. just my personal opinion. )